Showing all 7 results
This is the adapter for monolithic USB flash disks. Adapter supports three different pinouts and therefore has three boards and two frames in kit.
The socket and frames can be easily swapped between the boards. Adapter is designed for 8-bit single databus flash chips.
This adapter is designed for monolithic SD cards with a very common pattern of technological pads.
Adapter supports three different sizes of device and therefore has three frames in kit. Adapter is designed for single/dual 8-bit databus flash chips.
This adapter is designed for SD cards with columns of pads on sides.
It has 3 different boards to support multiple different devices. The PCB1, PCB2 boards have single 8-bit data bus and PCB3 board has dual 8-bit data bus.
The PCB2 and PCB3 have additional power (VccQ) which is necessary to improve the quality of NAND reading.
NAND adapter designed for damaged SD cards made by Sandisk. Adapter supports 3 different sizes of devices which are common in ~90% of Sandisk SD cards. The databus size is 8 bits.
NAND adapter designed for damaged microSD cards mainly made by Sandisk.
Adapter supports multiple card’s pcb designs which are common in ~80% of Sandisk microSD cards.
The main criteria is 3 rows of 7 pads on the device. The databus size is 8 bits.
NAND adapter designed for damaged microSD cards made by Kingston, Kingmax,
Toshiba, Apacer, Goodram and other brands. Adapter supports multiple card’s pcb designs with small and large pads.
The main criteria is 6 columns of 4 pads on the device. The databus size is 8 bits.
This adapter is designed for damaged Sandisk flash drives with both USB 2.0 and 3.0 interfaces. This adapter supports 4 different pinouts and therefore has 4 PCBs and 4 frames. The adapter is designed for devices with single 8-bit data bus. The socket and frames can be easily swapped between the boards, allowing you to change several different devices in a short time.