Sandisk monoUFD NAND adapter is designed for damaged Sandisk flash drives with both USB 2.0 and 3.0 interfaces.
This adapter supports 3 different pinouts and therefore has 3 PCBs and 3 frames.
The adapter can handle devices with single 8-bit data bus.
The socket and frames can be easily swapped between the boards, allowing you to change several different devices in a short time.
All surface mounted components should be removed from device before inserting into adapter.
MonoSD 4×0 pads adapter adapter is designed for SD cards with columns of pads, on sides from various brands (Sony, Verbatim, Lexar, etc).
It has 3 different boards to support multiple different devices with different pinouts.
The PCB1, PCB2 boards have single 8-bit data bus while PCB3 board has dual 8-bit data bus.
The PCB2 and PCB3 have additional power (VccQ) which is necessary to improve the quality of NAND reading in some cases.
The Samsung BGA169 #4 adapter was designed for specific eMMC chip KMVYL000LM which is widely used in many devices such as phones, TVs, tablets, etc. The chip size is 12x16mm with dual 8-bit data bus.
Adapters available for purchase.
Please send request to sales@rusolut.com to get a quote.
More adapters coming soon!
