New adapters for monolithic SD, UFD and eMMC devices!
Sandisk monoUFD

Sandisk monoUFD NAND adapter is designed for damaged Sandisk flash drives with both USB 2.0 and 3.0 interfaces.
This adapter supports 3 different pinouts and therefore has 3 PCBs and 3 frames.
The adapter can handle devices with single 8-bit data bus.
The socket and frames can be easily swapped between the boards, allowing you to change several different devices in a short time.
All surface mounted components should be removed from device before inserting into adapter.
MonoSD 4×10 pads

MonoSD 4×0 pads adapter adapter is designed for SD cards with columns of pads, on sides from various brands (Sony, Verbatim, Lexar, etc).
It has 3 different boards to support multiple different devices with different pinouts.
The PCB1, PCB2 boards have single 8-bit data bus while PCB3 board has dual 8-bit data bus.
The PCB2 and PCB3 have additional power (VccQ) which is necessary to improve the quality of NAND reading in some cases.
Samsung BGA169 #4
