Read NAND flash memory chips

TSOP48, LGA52, LGA60, TSOP56, BGA100, BGA152, BGA154, BGA224, Monolithic chips

Samsung, Sandisk, Hynix, Toshiba, Intel, Micron and others

Asynchronous ONFI, DDR, WL tripple adress, WL tripple address with DDR

SLC, MLC, TLC

Power adjustment of Core and I/O ports of NAND chips from 1.6V to 4.0V. This feature is important for all 1.8V NAND chips. Power adjustment also helps to reduce bit errors that appear while memory chip reading under standard 3.3 Volts. Voltage level can be adjusted through software.

Read NAND physical image to file (data recovery and digital forensics)

Real-time access (Bit error estimation, NAND configuration analysis)

According to ONFI standard and Samsung recommendations the reader supports 8-bit and 16-bit data bus.

Data transfer rate is 7-10 Mb/s depending on NAND chip

Mini-USB 2.0 interface for connecting to PC

ZIF interface for adapter connection

Green – USB power, Yellow – NAND power, Red – Error

We recommend to use Windows 11 x64 (Windows 10 x64 is OK too) for better performance.